Steel
Insulated, secure and good value. Best when it's kept painted and the bottom edge stays sealed.
Across Alberta
Entry doors
We repair and replace front, back and side entry doors in steel, fibreglass and wood, fitted square and sealed against cold and drafts.
What we do
- Prehung entry door replacement
- Sidelites and transoms
- Weatherstripping and door sweeps
- Thresholds and sills
- Deadbolts, handlesets and smart locks
- Re-hanging sagging doors
- Storm door installation
Overview
Entry doors, done properly
Your entry door is the one you use most and the one the weather hits hardest. Most entry door problems come from seasonal movement, worn weatherstripping, a sagging hinge or a failed threshold, and a lot of them can be fixed without replacing the door.
When replacement is the better spend, we install a new prehung unit, insulate the gap between frame and framing, seal it properly and finish the trim, inside and out.
When to call
Signs you need us
- Drafts, frost or light around the edges
- The door sticks in summer and gaps in winter
- The deadbolt doesn't line up with the strike
- Rot at the bottom of the door or frame
- Fogged glass in the door or sidelites
What we cover
Every job is different. These are the kinds of entry doors work we do most.
Fibreglass
Won't dent or rot, holds its shape through temperature swings, and can be stained to look like wood.
Wood
Looks great and can be refinished, but needs more upkeep and protection from sun and moisture.
Brands we work with
We are an authorized dealer for these brands. We supply, install and service their products, and match existing hardware during repairs.
Related hardware
The hardware that usually goes with this work.
- Locks & cylindersResidential deadbolts, commercial cylindrical and mortise locks, high-security and interchangeable-core cylinders.
- Thresholds & weatherstrippingThresholds, door bottoms, sweeps and seals that keep out cold, snow, smoke and sound.
- Hinges & pivotsButt hinges, continuous hinges, pivots and electrified hinges for doors of every weight.
Entry doors near you
We work across Alberta. Pick your city or town for local details.
Calgary region
Edmonton region
Central Alberta
Southern Alberta
Northern Alberta
How a job runs
Four steps, and you'll know the price before any work starts.
- Step 1
Tell us what you need
Send photos and details through the form, or call. For commercial work, send the door and hardware schedule if you have one.
- Step 2
We look on site
We confirm sizes, handing, frame condition, power and hardware before anything gets ordered.
- Step 3
You get a written quote
Itemized by door, hardware and labour, with lead times for anything that has to be ordered.
- Step 4
We install and test
We adjust until it closes, latches, locks and opens the way it should, then clean up before we leave.
Questions we hear a lot
Should I repair my entry door or replace it?
Repair makes sense when the slab is solid and the trouble is the hinges, latch, weatherstripping or alignment. Replacement is usually the better spend when the door is rotted, delaminating or warped, or the glass seal has failed.
Can you replace an entry door in winter?
Yes. The old door stays in until the new one is ready to set, so the opening is only exposed briefly. We insulate the gap and use sealants rated for cold-weather application.
What size is my entry door?
Most entry doors are 36 inches wide and 80 inches tall, but older and custom homes vary. Our measuring guide shows you what to measure, and we always re-measure on site.
Get a quote
Tell us about the door and what you need. Photos, drawings or a hardware schedule help us quote faster and more accurately.
- Phone
- 1 800 716 8955
- contact@hsmcm.ca
- Hours
- Calls and email answered 24/7/365
- Area
- Across Alberta
- Head
- Suite 3400, 10180 101 St NW, Edmonton, AB T5J 3S4
- St. Albert
- 175 Carleton Dr, St. Albert, AB T8N 7X9
Helpful to include
- Photos of both sides of the door and its hardware
- A close-up of the hinge edge and any labels
- Width, height and handing if you know them